HOW YOU INSTALL
PUTTING IT ALL TOGETHER
1 Screw the INVISAGRIP™ Starters onto the beam, hammer the first board onto the Starter pieces, then hammer the first row of INVISAGRIP™ Connectors onto the other side of the board.

2 Check that the board ends are flush. Set the second INVISAGRIP™ Connector row on the foundation beam.

3 Lay the preset INVISAGRIP™ Installation Tool on the board. Press the board down.

4 Pull the lever on the INVISAGRIP™ Installation Tool to create sufficient tension. The resulting joint space should be 1/4". If necessary, release and re-adjust the INVISAGRIP™ Installation Tool.

5 Screw down the INVISAGRIP™ Connector while the INVISAGRIP™ Installation Tool is still tight.

Click here to download the INVISAGRIP™ Safety Manual includes English, French and Spanish languages.

Click here to download the INVISAGRIP™ Installation Manual including instructions in English, Spanish, French and German.